Sections on this page:
On Floor | Walling |Square Silos | Round Silos | Hopper Bottoms |Bulk Loading Hoppers  

MAIN AIR DUCTS AND LATERALS

• Standard Ducts 3' and 4' wide. Special width Ducts available to suit alternative systems
• Standard Duct heights 6', 8' and 10' for Level Fill Storage - HIGHER DUCTS AVAILABLE
• Steel Main Frames clad with Galvanised Steel Profiled Sheets for proven strength. Suitable for all types of Drying Floor Systems. Sloping roof for external use available
• Alternative timber clad ducts available
• Free Planning and Product Advisory Service available

click here for a leaflet

Also timber drive over floors.

Above and below floor laterals available for bulk stores.   (See our Aeration section)

• Horizontal and vertical galvanized steel profile panels available for suitable buildings designed to take grain thrust or self supporting with RSJ's 8' storage depth to 14' level or surcharge fill.

• Also portable walling 6'-14' high. 'L' and 'T' shape steel or timber construction.
• Free Planning and Product Advisory Service available

click here for a leaflet

• Modular construction square bins from 2m x 2m to 6m x 3m with heights to suit requirements. Air sweep floors and tunnels. Also smooth wall silos available in similar sizes.

• Can incorporate hopper bottoms and bulk loading hoppers. Supplied in kit form.      
• Free Planning and Product Advisory Service available

click here for a leaflet

Flat Bottom;

• 4 meters to 27 meters diameter
• 18 cu.m to 18162 cu.m
• Shallow Corrugation 600gm/m2 galvanized wall sheets
• Full range of catwalks and ladders available
• Lateral or plank floor aeration systems
• Full range of combination sweeps and unloading augers
• Free Planning and Product Advisory Service available

Aeration systems to suit
Supplied in kit form

click here for a leaflet

Click here for link to www.bentallrowlands.com

Round;

• 3 meters to 10 meters diameter
• 15.3 cu.m to 2000 cu.m
• 45 or 60 degree hopper
• 600gm/m2 galvanized wall sheets
• Full range of catwalks and ladders available
• Suitable for indoor or outdoor use

Square;

• 1 x 1 meters to 3 x 3 meters 
• 45 or 60 degree screw discharge hoppers available
• 13 cu.m to 72 cu.m capacities
• Smooth wall galvanized construction
• Suitable for indoor or outdoor use

Rectangular;

• 1.25 x 2.5 m, 1.5m x 2m or 2m x 3m available
• Free Planning and Product Advisory Service available

click here for a leaflet

Bulk Loading Hoppers;

• 4m dia round or 3x4m bulk loading hoppers
• Galvanised construction
• capacities to suit requirements.
• Available as single unit or multiple units.
• Indoor or outdoor use.
• Supplied in kit form with access ladder and platform available.
• Free Planning and Product Advisory Service available

click here for a leaflet